STD12NF06LT4中文资料

N-channel 60V - 0.08Ω - 12A - DPAK - IPAK

STripFET™ II Power MOSFET

General features

TypeSTD12NF06LSTD12NF06L-1

■■

VDSSS60V60V

RDS(on)<0.1Ω<0.1Ω

ID12A 12A

31123Exceptional dv/dt capabilityLow gate charge

DPAKIPAKDescription

This Power MOSFET is the latest development of STMicroelectronics unique \"Single Feature Size™\" strip-based process. The resulting

transistor shows extremely high packing density for low on-resistance, rugged avalanche

characteristics and less critical alignment steps therefore a remarkable manufacturing reproducibility.

Internal schematic diagramApplications

■

Switching application

Order codes

Part numberSTD12NF06LT4STD12NF06L-1

MarkingD12NF06LD12NF06L

PackageDPAKIPAK

PackagingTape & reelTube

February 2007 Rev 61/14

www.st.com

14ContentsSTD12NF06L

Contents

12

Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

2.1

Electrical characteristics (curves) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

3456

Test circuit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9Packaging mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

2/14

STD12NF06LElectrical ratings

1 Electrical ratings

Table 1.

SymbolVDSVDGRVGSID ID IDM (1)PTOT

Absolute maximum ratings

Parameter

Drain-source voltage (VGS = 0)Drain-gate voltage (RGS = 20KΩ)Gate-source voltage

Drain current (continuous) at TC = 25°CDrain current (continuous) at TC=100°CDrain current (pulsed)Total dissipation at TC = 25°CDerating factor

Value6060± 16128.548300.215100-55 to 175

UnitVVVAAAWW/°CV/nsmJ°C

dv/dt (2)Peak diode recovery voltage slopeEAS (3)TstgTJ

Single pulse avalanche energyStorage temperature

Max. operating junction temperature

1.Pulse width limited by safe operating area2.ISD ≤ 12A, di/dt ≤ 200A/µs, VDS ≤ 40V, TJ ≤ TJMAX3.Starting TJ = 25 oC, ID = 6A, VDD = 30V

Table 2.

SymbolRthJCRthJATl

Thermal data

Parameter

Thermal resistance junction-case MaxThermal resistance junction-ambient MaxMaximum lead temperature for soldering

purpose

Value5100275

Unit°C/W°C/W°C

3/14

Electrical characteristicsSTD12NF06L

2 Electrical characteristics

(TCASE=25°C unless otherwise specified)Table 3.

SymbolV(BR)DSS

On/off states

Parameter

Drain-source breakdown

voltage

Zero gate voltage drain current (VGS = 0)

Gate body leakage current(VDS = 0)

Gate threshold voltageStatic drain-source on resistance

Test conditions ID = 25mA, VGS = 0VDS = Max ratingVDS = Max rating, TC = 125°CVGS = ±20V

VDS= VGS, ID = 250µAVGS = 10V, ID = 6AVGS = 5V, ID = 6A

1

0.080.10

Min.60

110

Typ.

Max.

UnitVµAµA

IDSS

IGSSVGS(th)RDS(on)

±10020.100.12

nAVΩ Ω

Table 4.

Symbolgfs (1)CissCossCrssQgQgsQgd

Dynamic

Parameter

Forward transconductanceInput capacitanceOutput capacitanceReverse transfer capacitanceTotal gate chargeGate-source chargeGate-drain charge

Test conditions VDS = 25V, ID = 6A VDS = 25V, f = 1 MHz, VGS = 0

Min.

Typ.735075307.52.53.0

10Max.

UnitSpFpFpFnCnCnC

VDD = 48V, ID = 12A VGS = 5V

1.Pulsed: pulse duration=300µs, duty cycle 1.5%

Table 5.

Symboltd(on)trtd(off)tf

Switching times

Parameter

Turn-on delay timeRise time

Turn-off delay timeFall time

Test conditionsVDD = 30V, ID = 6A, RG = 4.7Ω, VGS = 4.5VFigure12 on page8

Min.

Typ.10352013

Max.

Unitnsnsnsns

4/14

STD12NF06LElectrical characteristics

Table 6.

SymbolISDISDMVSD(1)trrQrrIRRM

Source drain diode

Parameter

Source-drain currentSource-drain current (pulsed)Forward on voltage Reverse recovery timeReverse recovery chargeReverse recovery current

ISD = 12A, VGS = 0ISD = 12A,

di/dt = 100A/µs,

VDD = 16V, TJ = 150°CFigure14 on page8

50652.5

Test conditions

Min

Typ.

Max12481.5

UnitAAVnsµCA

1.Pulsed: pulse duration=300µs, duty cycle 1.5%

5/14

Electrical characteristicsSTD12NF06L

2.1 Electrical characteristics (curves)

Figure 1.

Safe operating area Figure 2.

Thermal impedance

Figure 3.

Output characteristicsFigure 4.

Transfer characteristics

Figure 5.

TransconductanceFigure 6.

Static drain-source on resistance

6/14

STD12NF06LFigure 7.

Electrical characteristics

Capacitance variations

Gate charge vs. gate-source voltageFigure 8.

Figure 9.

Normalized gate threshold voltage vs. temperatureFigure 10.Normalized on resistance vs.

temperature Figure 11.Source-drain diode forward

characteristics

7/14

Test circuitSTD12NF06L

3 Test circuit

Figure 13.Gate charge test circuit

Figure 12.Switching times test circuit for

resistive load Figure 14.Test circuit for inductive load Figure 15.Unclamped Inductive load test

switching and diode recovery timescircuit Figure 16.Unclamped inductive waveform

8/14

STD12NF06LPackage mechanical data

4 Package mechanical data

In order to meet environmental requirements, ST offers these devices in ECOPACK® packages. These packages have a Lead-free second level interconnect. The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark. ECOPACK specifications are available at: www.st.com

9/14

Package mechanical dataSTD12NF06L

TO-251 (IPAK) MECHANICAL DATADIM.AA1A3BB2B3B5B6CC2DEGHLL1L20.450.4866.44.415.990.80.80.30.950.60.66.26.64.616.39.41.210.0170.0190.2360.2520.1730.6260.3540.0310.031mmMIN.2.20.90.70.645.2TYP.MAX.2.41.10.95.40.850.0120.0370.0230.0230.2440.2600.1810.6410.3700.0470.039MIN.0.0860.0350.0250.204inchTYP.MAX.0.0940.0430.0510.0310.2120.0331.3 0.027HC A C2 1 2 3 L2DB3 B6 A1 L= = = = B5 B A3 L1= = B2 G E 0068771-E10/14

STD12NF06LPackage mechanical data

DPAK MECHANICAL DATAmm.DIM.MIN.AA1A2Bb4CC2DD1EE1ee1HL(L1)L2L4RV22.20.90.030.645.20.450.4865.16.44.72.284.49.3512.80.80.60.20°8°0°10.0230.0088°4.610.10.1730.3680.0390.1100.0310.0396.60.2520.1850.0900.1810.397TYPMAX.2.41.10.230.95.40.60.66.2MIN.0.0860.0350.0010.0250.2040.0170.0190.2360.2000.260TYP.MAX.0.0940.0430.0090.0350.2120.0230.0230.244inch0068772-F11/14

Packaging mechanical dataSTD12NF06L

5 Packaging mechanical data

DPAK FOOTPRINT

All dimensions are in millimeters

TAPE AND REEL SHIPMENT

REEL MECHANICAL DATA

DIM.ABCDGNT

1.512.820.216.450

22.418.413.2mmMIN.

MAX.330

0.0590.5040.5200.7950.6450.7241.968

0.881

BULK QTY2500inchMIN.

MAX.12.992

TAPE MECHANICAL DATA

DIM.A0B0B1DD1EFK0P0P1P2R

W

BASE QTY2500

mmMIN.6.810.41.51.51.657.42.553.97.91.940

15.7

16.3

inchMIN.

MAX.

7

0.2670.2750.4090.417

0.476

0.0590.0630.0590.0650.0730.2910.2990.1000.1080.1530.1610.3110.3190.0750.0821.574

0.618

0.641

MAX.10.612.11.61.857.62.754.18.12.1

12/14

STD12NF06LRevision history

6 Revision history

Table 7.

Date09-Sep-200408-Aug-200619-Feb-2007

Revision history

Revision

456

Complete document

New template, no content changeTypo mistake on page 1

Changes

13/14

STD12NF06L

Please Read Carefully:

Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve theright to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at anytime, without notice.

All ST products are sold pursuant to ST’s terms and conditions of sale.

Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes noliability whatsoever relating to the choice, selection or use of the ST products and services described herein.

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of thisdocument refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party productsor services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of suchthird party products or services or any intellectual property contained therein.

UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIEDWARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIEDWARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWSOF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOTRECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAININGAPPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY,DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS \"AUTOMOTIVEGRADE\" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK.

Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately voidany warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, anyliability of ST.

ST and the ST logo are trademarks or registered trademarks of ST in various countries.Information in this document supersedes and replaces all information previously supplied.

The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.

© 2007 STMicroelectronics - All rights reserved

STMicroelectronics group of companies

Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan -

Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America

www.st.com

14/14