Rem Reset CMU
CMUBASE: *RST;*CLS;*OPC? CMUBASE: *IDN?
Rem Set Secondary address
CMUBASE: SYST:REM:ADDR:SEC 2,\"GSM900MS_Sig\" CMUBASE: SYST:REM:ADDR:SEC 4,\"GSM1800MS_Sig\"
Rem Configure RF IN/Out to RF port 2, config attenuation GSM CMUGSM: INP:STAT RF2 CMUGSM: OUTP:STAT RF2
CMUGSM: SENS:CORR:LOSS:INP2 1.0 CMUGSM: SENS:CORR:LOSS:OUTP2 1.0
CMUGSM: LEV:MODE PCL
Rem set BCCH Chan 32, Lev -80dBm CMUGSM: CONF:BSS:CCH:CHAN 32 CMUGSM: CONF:BSS:CCH:LEV -80 CMUGSM: CONF:NETW:REQ:HAND OFF
Rem Configure Power/Modulation Measurements for GSM CMUGSM: CONF:POW:MPR:CONT:REP SING,NONE,NONE CMUGSM: CONF:POW:MPR:CONT ARR,5 CMUGSM: CONF:SUB:POW:MPR ARIT,-7.25,1,-4.5,1,-2.25,1,0.5,1,77.0,1,79.75,1,81.75,1,84.5,1,147.5,1,150.25,1,152.5,1,155.25,1
Rem Configure Fast NPOWer Measurements for GSM CMUGSM: CONF:NPOW:CONT 5,SING,NONE,NONE
REM Configure Spectrum due to switch/modulation measurements for GSM CMUGSM: CONF:SPEC:SWIT:CONT ARR,20 CMUGSM: CONF:SPEC:MOD:CONT ARR,25 CMUGSM: CONF:SPEC:MOD:AVG AB CMUGSM: CONF:SPEC:MSW:CONT ARR
Rem BBB, 88 frames = 10kbits(88 frames x 114 =10032 bits) for GSM CMUGSM: CONF:RXQ:CONT:HTIM 0.2,0.0
CMUGSM: CONF:RXQ:BER1:CONT:LEV:UTIM -104.0 CMUGSM: CONF:RXQ:BER1:CONT:REP NONE, NONE CMUGSM: CONF:RXQ:BER1:CONT BBB,88
CMUGSM: CONF:RXQ:BER:TSET T1
Rem Configure RF IN/Out to RF port 2, config attenuation DCS CMUDCS: INP:STAT RF2 CMUDCS: OUTP:STAT RF2
CMUDCS: SENS:CORR:LOSS:INP2 1.5 CMUDCS: SENS:CORR:LOSS:OUTP2 1.5
CMUDCS: LEV:MODE PCL
CMUDCS: CONF:NETW:REQ:HAND OFF
Rem Configure Power/Modulation Measurements for DCS CMUDCS: CONF:POW:MPR:CONT:REP SING,NONE,NONE CMUDCS: CONF:POW:MPR:CONT ARR,5 CMUDCS: CONF:SUB:POW:MPR ARIT,-7.25,1,-4.5,1,-2.25,1,0.5,1,77.0,1,79.75,1,81.75,1,84.5,1,147.5,1,150.25,1,152.5,1,155.25,1
Rem Configure Fast NPOWer Measurements for DCS CMUDCS: CONF:NPOW:CONT 5,SING,NONE,NONE
Rem Configure Spectrum due to switch/modulation measurements for DCS CMUDCS: CONF:SPEC:SWIT:CONT ARR,20 CMUDCS: CONF:SPEC:MOD:CONT ARR,25 CMUDCS: CONF:SPEC:MOD:AVG AB CMUDCS: CONF:SPEC:MSW:CONT ARR
Rem BBB, 88 frames = 10kbits(88 frames x 114 =10032 bits) for DCS CMUDCS: CONF:RXQ:CONT:HTIM 0.2,0.0
CMUDCS: CONF:RXQ:BER1:CONT:LEV:UTIM -102.0 CMUDCS: CONF:RXQ:BER1:CONT:REP NONE, NONE CMUDCS: CONF:RXQ:BER1:CONT BBB,88 CMUDCS: CONF:RXQ:BER:TSET T1
Rem Config TCH parameter and MS PCL, Switch on CMU BCCH CMUGSM: CONF:BSS:TCH:CHAN 1
CMUGSM: CONF:BSS:TCH:LEV:UTIM -80 CMUGSM: CONF:NETW:POW 5
CMUGSM: PROC:SIGN:ACT SON;*OPC?
WAITKEY Please switch on your mobile, it should be swtiched off before
Rem Wait for Mobile Location update.
REPORT OFF [nosync] PAUSE 100
IF CMUGSM: SENS:SIGN:STAT? <> SYNC GOTO nosync REPORT ON
Rem CMU Call to Mobile
CMUGSM: PROC:SIGN:ACT MTC;*OPC?
WAITKEY Please answer the call
Rem Wait for Call Established REPORT OFF [nocest] PAUSE 100
IF CMUGSM: SENS:SIGN:STAT? <> CEST GOTO nocest REPORT ON
FPRINT No.1 Channel=1, PCL=5 RX Level = -80 CMUGSM: READ:POW:MPR?;:FETC:SUB:POW:MPR:BURS? CMUGSM: READ:ARR:SPEC:MSW?;:FETC:SPEC:MSW? REPORT OFF
WHILE CMUGSM: RREP:RXL? = NAN REPORT ON
CMUGSM: RREP:RXL?
FPRINT No.2 Channel=1, PCL=11 RX Level = -80 CMUGSM: PROC:SIGN:TCH:MS:PCL 11;*OPC? CMUGSM: READ:NPOW?
FPRINT No.3 Channel=1, PCL=19 RX Level = -104 CMUGSM: PROC:SIGN:TCH:MS:PCL 19;*OPC? CMUGSM: INIT:RXQ:BER
CMUGSM: READ:POW:MPR?;:FETC:SUB:POW:MPR:BURS? CMUGSM: FETC:RXQ:BER?
Rem Channel=62, PCL=5 RX Level = -80 CMUGSM: PROC:SIGN:CHCC 62,3,5;*OPC?
FPRINT No.4 Channel=62, PCL=5 RX Level = -80 CMUGSM: READ:POW:MPR?;:FETC:SUB:POW:MPR:BURS? CMUGSM: READ:ARR:SPEC:MSW?;:FETC:SPEC:MSW? REPORT OFF
WHILE CMUGSM: RREP:RXL? = NAN REPORT ON
CMUGSM: RREP:RXL?
FPRINT No.5 Channel=62, PCL=11 RX Level = -80 CMUGSM: PROC:SIGN:TCH:MS:PCL 11;*OPC? CMUGSM: READ:NPOW?
FPRINT No.6 Channel=62, PCL=19 RX Level = -104 CMUGSM: PROC:SIGN:TCH:MS:PCL 19;*OPC? CMUGSM: INIT:RXQ:BER
CMUGSM: READ:POW:MPR?;:FETC:SUB:POW:MPR:BURS? CMUGSM: FETC:RXQ:BER?
Rem Channel=124, PCL=5 RX Level = -80 CMUGSM: PROC:SIGN:CHCC 124,3,5;*OPC?
FPRINT No.7 Channel=124, PCL=5 RX Level = -80 CMUGSM: READ:POW:MPR?;:FETC:SUB:POW:MPR:BURS? CMUGSM: READ:ARR:SPEC:MSW?;:FETC:SPEC:MSW? REPORT OFF
WHILE CMUGSM: RREP:RXL? = NAN REPORT ON
CMUGSM: RREP:RXL?
FPRINT No.8 Channel=124, PCL=11 RX Level = -80 CMUGSM: PROC:SIGN:TCH:MS:PCL 11;*OPC? CMUGSM: READ:NPOW?
FPRINT No.9 Channel=124, PCL=19 RX Level = -104 CMUGSM: PROC:SIGN:TCH:MS:PCL 19;*OPC? CMUGSM: INIT:RXQ:BER
CMUGSM: READ:POW:MPR?;:FETC:SUB:POW:MPR:BURS? CMUGSM: FETC:RXQ:BER?
Rem Prepare for handover to DCS...
Rem set DCS TCH Chan 512, PCL 0, TCH level -80dBm CMUDCS: CONF:BSS:TCH:CHAN 512
CMUDCS: CONF:BSS:TCH:LEV:UTIM -80 CMUDCS: CONF:NETW:POW 0
Rem Dual-band Handover to DCS
CMUGSM: CONF:HAND:TARG 'GSM1800MsDualBand' CMUGSM: PROC:SIGN:ACT HAND
[NOCED] REPORT OFF PAUSE 50
IF CMUDCS: SENS:SIGN:STAT? <> CED GOTO NOCED REPORT ON
FPRINT No.10 Channel=512, PCL=0 RX Level = -80 CMUDCS: READ:POW:MPR?;:FETC:SUB:POW:MPR:BURS? CMUDCS: READ:ARR:SPEC:MSW?;:FETC:SPEC:MSW? REPORT OFF
WHILE CMUDCS: RREP:RXL? = NAN REPORT ON
CMUDCS: RREP:RXL?
FPRINT No.11 Channel=512, PCL=7 RX Level = -80 CMUDCS: PROC:SIGN:TCH:MS:PCL 7;*OPC? CMUDCS: READ:NPOW?
FPRINT No.12 Channel=512, PCL=15 RX Level = -102 CMUDCS: PROC:SIGN:TCH:MS:PCL 15;*OPC? CMUDCS: INIT:RXQ:BER
CMUDCS: READ:POW:MPR?;:FETC:SUB:POW:MPR:BURS? CMUDCS: FETC:RXQ:BER?
Rem Channel=700, PCL=0 RX Level = -80 CMUDCS: PROC:SIGN:CHCC 700,3,0;*OPC?
FPRINT No.13 Channel=700, PCL=0 RX Level = -80 CMUDCS: READ:POW:MPR?;:FETC:SUB:POW:MPR:BURS? CMUDCS: READ:ARR:SPEC:MSW?;:FETC:SPEC:MSW? REPORT OFF
WHILE CMUDCS: RREP:RXL? = NAN REPORT ON
CMUDCS: RREP:RXL?
FPRINT No.14 Channel=700, PCL=7 RX Level = -80 CMUDCS: PROC:SIGN:TCH:MS:PCL 7;*OPC? CMUDCS: READ:NPOW?
FPRINT No.15 Channel=700, PCL=15 RX Level = -102 CMUDCS: PROC:SIGN:TCH:MS:PCL 15;*OPC? CMUDCS: INIT:RXQ:BER
CMUDCS: READ:POW:MPR?;:FETC:SUB:POW:MPR:BURS?
CMUDCS: FETC:RXQ:BER?
Rem Channel=885, PCL=0 RX Level = -80 CMUDCS: PROC:SIGN:CHCC 885,3,0;*OPC?
FPRINT No.16 Channel=885, PCL=0 RX Level = -80 CMUDCS: READ:POW:MPR?;:FETC:SUB:POW:MPR:BURS? CMUDCS: READ:ARR:SPEC:MSW?;:FETC:SPEC:MSW? REPORT OFF
WHILE CMUDCS: RREP:RXL? = NAN REPORT ON
CMUDCS: RREP:RXL?
FPRINT No.17 Channel=885, PCL=7 RX Level = -80 CMUDCS: PROC:SIGN:TCH:MS:PCL 7;*OPC? CMUDCS: READ:NPOW?
FPRINT No.18 Channel=885, PCL=15 RX Level = -102 CMUDCS: PROC:SIGN:TCH:MS:PCL 15;*OPC? CMUDCS: INIT:RXQ:BER
CMUDCS: READ:POW:MPR?;:FETC:SUB:POW:MPR:BURS? CMUDCS: FETC:RXQ:BER?
Rem CMU Release call
CMUDCS: PROC:SIGN:ACT CREL;*OPC?
因篇幅问题不能全部显示，请点此查看更多更全内容