Lonati型袜机产品设计--打样手册

Lonati型袜机产品设计--打样手册

Lonati型袜机产品设计--打样手册 第七章 电脑花袜产品设计

第一节Lonati型袜机产品设计

一、现在Lonati罗纳地电脑应用软件已推出最新版本,过去Lonati罗纳地用的是GR5软件已有十多年了,不少袜子行业机修工程师都已会操作使用,但现在已改版了用GR6软件,这对袜子行业有Lonati机器的机修和产品开収人员来说是一个新的知识,我想介绍给大家LonatiGR6应用软件也非常即时也非常有这必要。下面就介绍一下Lonati罗纳地GR6电脑程式和花型设计操作应用。

二、罗纳地GR6排程攻能

三、功能信号

1,Enter steppeg heel knitting 头跟开始

2,Exit heel knitting 头跟结束

3,Oiler 加油

4,End half stepped heel 压针结束

5.Stocking ejection 袜子结束出袜吹气信号

8 Stop machine with F4 inserted 部段顶机按F4有效

9. Enter uppel heel knitting 压针开始

10. Code welt start ( for F0 zero setting dial jacks ) 做罗口不能归零开盖 11. Code welt start ( for F0 zero setting dial jacks ) 做罗口不能归零信号结束 12. Dewiator for sock control 出袜信号开关

18. Enable sock passage 出袜计数开始作用

19. Control sock passage 出袜信号结束

31. Enter stepped rewerse heel knitting 袜头做脚面开始 32. Enit rewerse heel knitting 袜头做脚面结束

39. Selection st welt start for dial jack loading 罗口控制哈呋针 43. ----! Enter heel knitting Test sinkers patter 袜跟上提花 51. Start heel end Toe wide mowement 开始做大的袜跟 52. End heel end Toe wide mowement 结束做大的袜跟 58. Stop yarn cutter sew rotation 停圆盘剪刀离合器 59. Recowery yarn cutter sew rotation 起动圆盘剪刀离合器 70. Enable the motor for the wariable speed of the sa 起动圆盘剪刀马达 71. Stop of the motor for the wariable speed of the sa 停止圆盘剪刀马达 四、零件代号

1,Needles latch opener 开针舌

2,Lower dial 剪刀架高低

3,Sock drop out box motion 袜子落下

5. Elastic motor start 橡筋输送马达1

6. Elastic motor 2 start 橡筋输送马达2

9. Elastic binder 1 橡筋剪刀1

10. Elastic binder 2 橡筋剪刀2

15. Sinkers extraction for elastic 橡筋眉毛进出

19. Air blowing tranfer 剪刀架吹气

21. First feed terry lewer 全起毛刀

22. First feed terry lewer half cylinder 半起毛刀

29. Heel toe terry lewer 倒车起毛刀 30. Rib terry lewer feed 抽条起毛刀 35.Ducking stitch cam first feed 1口打松三角 36. Ducking stitch cam first feed.

pos.2 2口打松三角，无用，

55. Sinker cap pistom 顶生克盖快慢

56. Air blast clean sinkers 吹气，生克片， 59. Piston closer throat plate heel/toe方梭板门闩 61. Heel toe take-up Nr.1 跳头钢丝1 62. Heel toe take-up Nr.2 跳头钢丝2 63. Heel toe take-up Nr.3 跳头钢丝3 64. Heel toe take-up Nr.4 跳头钢丝4

66. Heedles stop in the baok 断针刹车1口 69. Front latch needles stop Nr.1 段线刹车1 70. Front latch needles stop Nr.2 段线刹车2 78. Auxiliary fan for turning device 反袜装置 81. Lycra tension device lst feed 反袜装置 85. Lycra tension device heel 氨纶张力器 89. Heedles latch opener Nr.2 2口开针器 91. User exit Nr.1 输出1

92. User exit Nr.2 输出2

93. User exit Nr.3 输出3

94. User exit Nr.4 输出4

101. Dropper on the right stop motion 右压针停止工作 102. Dropper on the left stop motion 左压针停止工作 108. Sinkers extractron for elastic position 2 橡筋眉毛 122. Control dral motor position 控制哈呋马达位置 146. Air suction valve 吸风阀门

155. Lycra motor 1 start 氨纶马达1

188. Disable obstructed dial 哈呋上装置 190. Air blast fabric for double welt 做扣口时吹气 五、三角代号

1. Enter dial jack phase 1 哈呋针出1级

2. Enter dial jack phase.2 哈呋针出2级

5. Exit dial jack phase 1 哈呋针进1级

6 Exit dial jack phase.2 哈呋针进2级

8. Return dial jack welt pattern 哈呋针进，提花用， 10. Eliminate elastic jacks T1下拉头，橡筋用， 11. Eliminate jacks feed 1 T2下拉头，结圈用， 17. Eliminate piker raising needle heel return 挑针控制 18. Eliminate piker raising needle feed 1

19. Piker needle lower right 右压针

20. Piker needle lower left 左压针

21. Tuck cam feed 1 position A 起针三角1级 22. Tuck cam feed 1 position B 起针三角2级

23. Clearing cam feed 1 position A 退圈三角1级

24. Clearing cam feed 1 position B 退圈三角2级

60. Stitch cam first feed 顺转成圈三角

61. Stitch cam heel/toe position A 倒车成圈三角1级 62. Stitch cam heel/toe position B 倒车成圈三角2级 63. Cam lowering elastic needles position A 橡筋压针三角1级 64. Cam lowering elastic needles position B 橡筋压针三角2级 84. Rise long butt entering heel/toe 头跟超针三角

86. Lowing needles wxit heel/toe 头跟压针三角

96. Sole renforcement cam 99. Routine dropper jaquard on the ridht 压针右信号 100. Routine dropper jaquard on the left 压针左信号 106. Cam rise needles heel/toe return swing position A 头跟倒车起针三角1级 107. Cam rise needles heel/toe return swing position B 头跟倒车起针三角2级

六、FUNCTION: 选款内容

MC001 Double welt 1F begin nylon and pattern

双罗口,1路开始尼龙和花型

MC002 Double welt 1F with picot and pattern

双罗口,1路配牙边和花型

MC003 Roll-top

反罗口

MC004 Short double welt 1F

短双罗口1路

MC005 Plain double welt no elastic

平纹双罗口，无橡筋，

MC006 Double welt 1F

双罗口1路，罗口里外无尼龙,全橡筋，

MC007 Double welt 1F with elastic begin

双罗口1路配橡筋开始

MC008 Single welt 1F

单罗口1路

MC009 Turned double welt wt pattern and picot

反双罗口配花型和牙边

MC031 Double welt with heel terry 1F

双罗口配毛圈袜跟1路，往复跟罗口毛圈，

MC032 Double welt with heel plain 1F

双罗口配平纹袜跟1路，往复跟罗口平纹，

MC041 Double welt with small heel terry

双罗口配小型毛圈袜跟，往复跟罗口小型毛圈，

MC042 Double welt with small heel plain

双罗口配小型平纹袜跟，往复跟罗口小型平纹，

MC101 Leg in terry 1F from double welt 1F

由1路双罗口转1路毛圈上统

MC103 Terry leg 1F from roll-top

反罗口转毛圈上统1路

MC104 Leg in terry 1F from short double welt

短罗口转1路毛圈上统

MC105 Terry leg 1F from double welt no elastic

由双罗口无橡筋转1路毛圈上统

MC106 Terry leg + elastic from double welt 1F

由1路双罗口转毛圈上统+橡筋

MC108 Leg in terry 1F from single welt

由单罗口1路转毛圈上统

MC121 Elastic leg from double welt 1F

由1路双罗口转橡筋上统

MC123 Elastic leg 1F from short roll-top

由反罗口转橡筋上统

MC124 Elastic leg 1F from short welt 1F

由短罗口1路转橡筋上统1路

MC128 Elastic leg 1F from single welt 1F

由1路单罗口转毛圈上统

MC133 Terry leg + elastic from roll-top

由反罗口转毛圈上统+橡筋

MC134 Leg in terry 1F + elastic from short welt

由短罗口转1路毛圈上统+橡筋

MC138 Terry leg + elastic from single welt

由1路单罗口转橡筋上统+橡筋

MC151 Plain leg 1F from double welt 1F

由1路双罗口转1路平纹上统

MC153 Plain leg 1F from roll-top

由反罗口转1路平纹上统

MC154 Plain leg 1F from short welt 1F

由1路短罗口转1路平纹上统

MC155 Plain leg 1F from double welt no elastic

由双罗口无橡筋转1路平纹上统

MC156 Plain medical leg from double welt 1C

由双罗口1路转平纹医疗袜上统

MC158 Plain leg 1F from single welt

由单罗口转1路平纹上统

MC161 Plain medical leg from double welt 1C

由双罗口1路转平纹医疗袜上统

MC163 Medical leg from roll-top

由反罗口转医疗袜上统

MC164 Plain medical leg from short double welt

由短双罗口转平纹医疗袜上统

MC168 Plain medical leg from single welt

由单罗口转平纹医疗袜上统

MC190 Leg with graduations

修匀腿型，长筒袜，

MC201 End elastic leg 1F for terry 1F

结束橡筋1路毛圈上统

MC210 Terry leg 1F from plain leg 1F

由1路平纹转1路毛圈上统

MC231 Elastic band 1F

1路橡筋带

MC301 Heel in terry

毛圈袜跟

MC302 Section “Y”

“Y”型跟

MC303 Begin heel from leg in terry 1F + elastic

由1路毛圈上统+橡筋转到开始袜跟

MC311 Elastic ankle with terry heel

橡筋踝配毛圈袜跟

MC312 Elastic ankle with terry “Y” heel

橡筋踝配毛圈“Y”型跟

MC321 Wide heel from terry leg 1F

从1路毛圈上统转特宽跟

MC351 Begin heel from plain leg 1F

从1路平纹上统到开始袜跟

MC353 Begin heel from plain medical leg

从平纹医疗袜上统到开始袜跟

MC371 High heel

高跟

MC401 End of heel for foot in terry 1F

结束1路毛圈袜底袜跟

MC411 End of heel and foot in terry 1F + elastic

结束1路毛圈+橡筋袜底袜跟

MC451 End of heel for plain foot 1F

结束1路平纹袜底袜跟

MC453 End of heel and plain medical foot

结束平纹医疗袜底袜跟

MC501 Foot

袜底，无袜跟，

MC601 Begin toe from foot in terry 1F

1路毛圈袜底到开始袜嘴

MC651 Begin toe from plain foot 1F

1路平纹袜底到开始袜嘴

MC700 Circular toe from foot in terry 1F

1路毛圈袜底到圆形袜嘴

MC701 Toe in terry with ROSSO and clip

毛圈袜嘴配ROSSO扎口

MC703 Terry toe linking + line(ROSSO) +ROSSO 1^ short ndl

毛圈袜嘴用手缝+ROSSO短脚针第一针开始

MC705 Right terry toe + ROSSO and clip

右毛圈袜子配ROSSO扎口

MC706 Left terry toe + ROSSO and clip

左毛圈袜子配ROSSO扎口

MC711 Reverse toe in terry with ROSSO

反毛圈袜嘴配ROSSO扎口

MC750 Circular toe from plain foot 1F

1路平纹袜底到圆形袜嘴

MC751 Plain toe with ROSSO and clip

平纹袜嘴配ROSSO扎口

MC752 Plain toe with linking line 1^ short ndl

平纹袜嘴用手缝第1针开始

MC753 Plain toe linking line + ROSSO 1^ short ndl

平纹袜嘴用手缝+ROSSO机缝

MC755 Right plain toe + ROSSO and clip

右平纹袜子配ROSSO扎口

MC756 Left plain toe +ROSSO and clip

左平纹袜子配ROSSO扎口

MC761 Reverse toe in plain with ROSSO

反平纹袜嘴配ROSSO扎口

MC950 Sock release without turning device

出袜不用反裤装置

MC951 Sock release for turning device and fan

出袜用反袜装置和风机

MC952 Sock release turning device central vacuum

出袜用反袜装置和中央吸风

七、Finger纱嘴

Finger 1 Feed 1 纱嘴 1

Finger 2 Feed 1 纱嘴 2

Finger 3 Feed 1 纱嘴 3

Finger 4 Feed 1 纱嘴 4

Finger 5 Feed 1 纱嘴 5

Finger 6 Feed 1 纱嘴 6

Finger 7 Feed 1 纱嘴 7

Second position Finger 1 Feed 1 纱嘴1第2个位置 Second position Finger 2 Feed 1 纱嘴2第2个位置 Second position Finger 3 Feed 1 纱嘴3第2个位置 Second position Finger 4 Feed 1 纱嘴4第2个位置 Second position Finger 5 Feed 1 纱嘴5第2个位置 Second position Finger 7 Feed 1 纱嘴7第2个位置 Elastic Finger Feed 1 橡筋纱嘴

Second position Elastic Finger Feed 1橡筋纱嘴 第2个位置 Change position Elastic Finger Feed 1调换橡筋纱嘴

Finger 1 elastic feed 橡筋纱嘴 1

Finger 2 elastic feed 橡筋纱嘴 2

八、Control Valve吸风阀门

0= 阀门关闭:针筒内无吸风

1=阀门打开:产生吸风

2=阀门打开:针筒内吸风来自袜篮

L=阀门部分打开，从状态0，

R=阀门部分关闭，从状态2，

九、Pattern花型

Name: 花型名字

Codify code: (1口.2口.)

Adjustment code: (C.R.L.M.S.D) 花型旋转 Adjustment needles count: (0.240) 针数 Adjustmention code: (N.Y) 普通戒选择

Status 花型打开，In，,花型关闭，Out，。 pattern name: insert the pattern name to activate

花型名字:插入花型名字启动

kind of codification: 1=single feed six colors 单路5色 2=double feacquard with 4colors 双路4色提花 3=single feed with 5 colors for elastic 单路4色橡筋 在编橡筋花型程序时使用。

to use when elastic pattern is programmed

pattern rotation: C=central 花型旋转

R=right 右

L=left 左

M=duplicates 2 repetition of the pattern 花型反复2次

As a mirror (it must be drawn on half needles number only)

S=sets the whole pattern as a mirror 整个花型反复

D=pattern rotation of 180 degree: 花型旋转180度

Needles number of rotation: allows the rotation by desired needles number 针数:允许需要针数旋转

Alternation: N=normal execution of the pattern 花型普通操作

Y=execution of the pattern with alternated stitch 提花时菱角变换

Only if codification 2(jacquard)is activated 十、Elastic Pattern橡筋图案

Name: 花型名字

Codify code: (.2口.)

Adjustment code: (C.R.L.M.S.D) 花型旋转

Adjustment needles count: (0.240) 针数

Adjustmention code: (N.Y) 普通戒选择

pattern name: insert the pattern name to activate 花型名字:插入花型名字启动

kind of codificaton: 4= it works only of code 3 is present on PATTERN area.

4= 只在代码3在花型区域时工作

Pattern rotation: 花型旋转 C=central 中间

R=right 右移

L=left 左移

M=duplicates 2 repetition of the pattern as a mirror(must be

drawn on half needles number only) 花型反复2次 S=sets the whole pattern as a mirror 整个花型作为一个镜面 D=pattern rotation of 180 degree: 花型旋转180度

Needles number of rotation: allow the rotation by desired needles number

针数旋转: 允许需要的针数旋转

Alternation: N=normal execution of the pattern 普通执行 Y= not in use 不用

Status 花型打开，In，,花型关闭，Out，。 十一、Selections固定提花

Name: 花型名字

Drum: (.1口.)

Type: (C.R.L.E) 花型旋转

Status 花型打开，In，,花型关闭，Out，。 degree(from 0 to 359) 角度

kind of selection (see selection list) 选择种类

drum number( from 1 to 8) 花鼓编号

drum number: insert the drum number(from 1 to 8) 插入花鼓编号，从1到8，

kind of selection: see the item LIST on the top_line 选择种类:查看位于顶部的列表,链条,

CHAIN for different possibilities

Degree: from 0 to 360 角度 从0到360度

Ducking Stitch Cam Pattern打松三角花型

Name: 花型名字

Codify code: (.1口.)

Adjustment code: (C.R.L.M.S.D) 花型旋转

Adjustment needles count: (0.240) 针数

Not used: (N.Y) 普通戒选择

Status 花型打开，In，,花型关闭，Out，。

pattern name: enter the name of the pattern to be activated

花型名字: 输入花型名字,开启

type of codification: 1= stitch cam pattern, feed 1 1路菱角花型 2=stitch cam pattern, feed1,2 1戒 2路菱角花型

pattern rotation: 花型旋转C=central 中间

R=right 右移

L=Left 左移

M=duplicated 2 repetition of the pattern as a mirror(It must be drawn on half

needles number only) 花型重复

S=sets the whole pattern as a mirror 设置整个花型为镜像

Needles number of rotation: allows the rotation by desired needles number

移动针数:可移动需要的针数

Alternation: not used 不用

十二、Superposed pattern复盖花型

Name: 花型名字

Mirrorig code:，C D，花型旋转

Codify code:，1口，

Neeles start:，0,240，开针数

Width needles:，0,240，针数宽度

Status 花型打开，In，,花型关闭，Out，

十三、罗纳地GR6绘图功能

以上已介绍了罗纳地Lonati袜子电脑排程和花型的产品设计功能,再不来我就介绍一下,怎样从头到尾来做一个袜子的电脑设计过程。

一、首先打开计算机罗纳地软件D3PIUS,再点亮机器型号,，例如G615棉袜、平

纹、毛圈二用机器，开始进行选袜子的款式Pvojects styles,走进选款后按New新的款式,再进行选sandwich terry毛圈戒Plain fabri平纹双击进入,具体选款式的内容可有资料参考P. 9全部选好后按OK,再按Sove存档叏名,然后就按Quasar进入程式,进入程式后第一步就要选Header机器的针数和针筒的口径,加油次数等,选好后马上Save存档,接下来再根据袜子的产品生产情况来修改调整,比如:袜子长短、横拉大小,速度要求等等,修改调整后再一次Save存档,这样就基本上一个没有花型的平纹戒毛圈袜子程式就完成了。 二、关于花型绘图电脑设计使用,首先双进打开计算机Phaton罗纳地绘图软件,在Machine选机器型号,同样我们选择G615机型,按OK,再按Wew进入新的绘图视窗,开始写入Width，needles，针数和Height(courses)圈数多少,再按OK,就会出现一个新的绘图

视窗,这样就可以按照袜子花型进行绘图设计,具体用颜色要求和绘图功能使用有资料参考P.19等全部花型设计好后,按Save存档叏名,这样就袜子绘图设计方面完成。 三、再次找要开罗纳地排程式软件,D3plus,走进后选择机型进入原来排好的程式名,找到Change pattern点击进入把设计好的花型名称,插入到袜子所需要的部位上,这样就进行花型和程式合幵成一个完全的程式,然后点进Save再次存档,最后就把完全程式输入到机器进行打样生产,这样就基本上完成一个电脑袜子花型和程式的设计工作。